• 首页
  • 公司介绍
  • 产品供应
  • 新闻热点
  • 购此域名
  • 贝博手机版-贝博官网app-贝博官方网址

    贝博手机版-贝博官网app-贝博官方网址

             本公司本着品质优先,,服务至上,质量求生存,诚信促发展的理念,以丰富的设计制造安装经验,为您规划、设计、安装及维护您所要求的陶瓷生产线,提供全方位的后勤支援(www.xjto.cn)。企业将以更新的观念、更完备的产品、更周到的服务来满足您的要求。 欢迎广大客户来我厂考察、参观、洽谈业务。   

     具体价格和运费请联系陈先生 15899550836

    红外线节能快速干燥器特点:

       红外线热源,它能辐射出6-14微米的远红外线,由于远红外线的频率与水分子固有频率接近,极容易发生分子、原子的共振,导致运动大大加剧,能够被加热环境中的水分子吸收产生的共振摩擦热效应,从而使得物质迅速得到干燥,实现了快速干燥的目的。一般的加热方法是利用热的传导和对流,需要通过媒质传播,速度慢,能耗大,而红外线是利用热辐射和水分子吸波原理,中间无需媒质传播。同时,由于辐射能与发热体温度的4次方成正比,因此,不仅节约能源而且速度快、效率高,干燥效果好。

     Infrared energy-saving fast dryer features: 

            Infrared heat source, it can radiate 6-14 micron far infrared ray. Since the frequency of far infrared ray is close to the natural frequency of water molecules, molecular and atomic resonances are very likely to occur, which leads to aggravation of motion and can be absorbed by water molecules in a heated environment. The resulting resonant frictional thermal effect allows the material to dry quickly and achieve rapid drying. The general heating method is the use of heat conduction and convection, the need to spread through the media, slow speed, high energy consumption, and infrared is the use of heat radiation and water molecules absorption principle, the middle without the media. At the same time, since the radiant energy is proportional to the fourth power of the heating element, it not only saves energy, but also has fast speed, high efficiency, and good drying effect.

     

     

    红外线节能快速干燥器优点:

     

    Infrared energy-saving fast dryer advantages:

     

    1、红外线干燥器高效节能: 光波有极强的透射力,能内外同时加热,因而被加热物能均匀受热,保障干燥物体的介质稳定。可提高 2~3倍以上干燥效率,工作过程中电热转换效率高达98% 以上。 从而可节省 2~3倍的能源。

     

        High efficiency and energy saving of infrared ray dryer: Light wave has strong transmission force, and can be heated at the same time inside and outside, so that the heated object can evenly heat and ensure the stability of the medium of the dry object. It can increase the drying efficiency by 2~3 times, and the electrothermal conversion efficiency can reach more than 98% during the work process. This saves 2~3 times energy

     

    2、红外线干燥器干燥效率快: 采用的发热体是一种进口的纳米纯黑体碳材料。无热惯性,因此具有升温迅速、热滞后小、快速升温,因而可减少干燥时间,设备占地小,投资回收周期短。

     

        Drying efficiency of infrared dryer is fast: The heating element used is an imported nano pure black carbon material. No thermal inertia, so it has a rapid temperature rise, a small thermal hysteresis, and rapid temperature increase, which can reduce the drying time, equipment, small footprint, short investment recovery cycle.

     

    3、红外线干燥器智能温控,同步控制: 采用独立单元电控柜和 PID 人机交互操作控制,使用安全方便。其传热效果好,温度均匀,具有很高的热容量系数(或体积传热系数),可在 5~10秒内达到设定加热效果。因干燥器与生产线同步控制,当生产线有故障停线,干燥器可以马上连锁同步控制。减少因停电停线造成产品温度不一致。

     

        Infrared dryer intelligent temperature control, synchronous control: It adopts independent unit electric control cabinet and PID man-machine interactive operation control, which is safe and convenient to use. The heat transfer effect is good, the temperature is even, and the heat capacity coefficient (or volume heat transfer coefficient) is high, and the set heating effect can be achieved within 5 to 10 seconds. Due to the synchronous control of the dryer and the production line, when the production line has a fault stop line, the dryer can immediately synchronize and control the chain. Reduce product temperature inconsistency due to power outages.

     

    4、红外线干燥器产品采用螺旋齿轮带动辊棒输送坯体,该系统经过多年检验,质量稳定可靠,维修工作简便。

     

         Infrared dryer products adopt helical gears to drive roller rods to convey blanks. After many years of testing, the system has stable and reliable quality and easy maintenance work.

     

     5、红外线干燥器加热方式采用电能,清洁环保,运行成本低。

     

         Infrared dryer heating method uses electricity, clean and environmentally friendly, low operating costs.

     

    6、红外线干燥器采用模段式结构,每模段为4米,可根据产量定制,全窑设抽湿风机1台,抽湿风斗1~3道,节省热源。

     

          Infrared dryer adopts modular segment structure, each module segment is 4 meters, can be customized according to the output, the entire kiln is equipped with a dehumidifying fan, dehumidifying the wind bucket 1~3, saving heat source.

     

     

    1、模段式结构,4米为一个单元,按需要订购,单价为一个模段的价格

     

    2、链轮带动螺旋齿轮传动结构,该结构经多年实用检验,质量稳定可靠

     

     

     

    3、智能温控:采用独立单元电控柜和 PID 人机交互操作控制,使用安全方便;因干燥器与生产线同步控制,当生产线有故障停线,干燥器可以马上连锁同步控制因停电停线造成产品温度不一致。

    主营产品:搬运车,电动叉车,空压机,贝博手机版机,潜孔钻机